🌍 English ▼
Voltvert.
📋
Operator guide
For property owners and managers
Enter access code
Incorrect code — try again
Voltvert.
Operator guide
For property owners and managers
Guests use the AC normally — just not wastefully.
You define the temperature range and automatic shutoff. Voltvert applies it directly from the remote.
🔗 Pair the remote with your AC
🌡️ Set your temperature range
⏱️ Add automatic shutoff controls
Voltvert.  ·  Operator guide v5.2
Before setup
Pair remote
Set limits
Done
🔗
Pair the remote
Connect Voltvert to your AC before anything else.
Auto pairing
1
Point the remote at the AC
2
Hold SELECT for 5 seconds
3
The remote starts scanning through codes
4
When the AC beeps
press ANY button immediately
⚠️
Be ready
  • The beep may only last a second — press immediately
  • The remote will keep scanning if you don't press
  • If you miss it, nothing breaks — just repeat the scan
Important
If you use multiple remotes for the same AC model, pair one first. Write down the working code and enter it directly on the others.
✓ Turn the AC on/off — if it responds, pairing is done
or
Manual pairing
Open the code list and find your AC brand. Try the listed codes until the AC responds.
Start with the first code listed for your brand. Most AC units are supported. If one code doesn't work, try the next.
Still not working?
You missed the beep → repeat the scan
AC didn't respond → move closer and try again
Still failing → your AC may not support standard remote signals
Setup — step 2 of 3
Pair remote
Set limits
Done
🌡️
Set temperature limits
Takes about 3 minutes
ℹ️ Setup mode stays active for 3 minutes. If it exits, repeat the first step.
1
Unlock setup
Press TEMP+ + TEMP−
Hold until the screen changes
Confirm ON
2
Set minimum temperature
Press SELECT + TEMP−
Hold 3s
Adjust TEMP+ / TEMP−
Confirm ENTER
3
Set maximum temperature
Press SELECT + TEMP+
Hold 3s
Adjust TEMP+ / TEMP−
Confirm ENTER
✓ Guests can adjust the temperature — but it will stay within your limits
Pair remote
Set limits
Done
✓
Core setup complete
Your basic protection is active.
Temperature limits are now applied automatically.
Recommended next step
Add automatic shutoff
Stop the AC running for hours when guests leave it on.
Impact estimate
📊
Estimate your savings & CO₂ impact
Want to see the likely positive impact of this Voltvert setup?
Answer 4 quick questions.
Your property
🏠
4 quick questions
We'll estimate your annual savings and CO₂ impact.
Number of AC units
Days occupied per year
Property type
Climate — optional
Your estimated impact
🌱
Your Voltvert impact
Based on your answers — estimated annual figures.
Estimated savings / year
€—
at 30–50% waste reduction
Energy saved
—
kWh / year
CO₂ avoided
—
kg CO₂ / year
Estimated payback
—
based on unit cost
Assumptions: 1.2 kW per AC unit · €0.25/kWh electricity · 0.24 kg CO₂/kWh · 30–50% reduction range
Anonymous setup data may be used to improve Voltvert estimates and sustainability reporting. No names, emails, or exact addresses are required.
Optional controls
⚙️
Reduce more waste
These are optional. Temperature limits alone already save significantly.
⏱️
Daytime auto-off
Turns the AC off automatically during selected hours
▼
Choose a period and how often it turns off. Targets the hours when guests are likely out but the AC is still running.
💡 Example: between 13:00–21:00, turns off every 2 hours
How to set this up ▼
1
Enter timer setting
SELECT + TmrOff → hold 3s
2
Enable
TEMP + / TEMP − → ON → ENTER
3
Set interval
TEMP + / TEMP − → ENTER
🌙
Night out mode
Turns the AC off once at the same time every night
▼
Ideal when guests are out late and the property is empty. Schedules a single shutoff at a consistent time each night.
💡 Example: turn off at 01:00, Monday–Sunday
How to set this up ▼
1
Turn on
SELECT + FAN → hold 3s → select ON → ENTER
2
Set schedule
SELECT + CLOCK → hold 3s → TEMP + / TEMP − → ENTER
Troubleshooting
🔧
Troubleshooting
Quick fixes for common situations.
AC not responding
Check pairing — go back to the pair step and repeat
Setup exited before I finished
Repeat the unlock step — TEMP+ + TEMP− until screen shows ON
Settings not saving
Press ENTER after each change
AC turns off unexpectedly
Check daytime auto-off or night out mode — one of them triggered
Factory reset
Restore default settings
SELECT + POWER → hold 10 seconds
Restores default settings only. Your AC pairing is unaffected.
ℹ️ After a reset, repeat the setup from screen 2 — Set temperature limits.